CR Magnetics

CR5210-2 電流傳感器，實芯

多種輸入輸出可滿足任何應用

35mm DIN導軌或面板安裝

可供0 - 5Vdc或4 - 20 mA直流輸出

精度*高

接線圖印在盒子上

CR4100系列

CR4100系列真有效值流傳感器和變送器的設計應用交流電流波形并非純粹的正弦。比其他傳感器更精密,準確,這些設備是理想的斬波和階段發射控制系統。CR4200系列 。

CR4200系列電流變送器產生一個校準4-20 mA直流信號，即是平均有效值輸入交流電成正比。專為多點電流檢測，這些設備提供高價值的優良特性。用戶產生的輸出信號是由24伏直流電源電流回路中輸出的。

CR4400 系列

CR4400系列，平均有效值電壓傳感器和變送器設計旨在提供直流輸出道交流輸出成正比。這些設備是*適合一般的應用，如固定頻率電壓電源。

系列CR4500 

CR4500系列，真有效值電壓傳感器和變送器的設計應用交流電壓波形并非純粹的正弦。比其他設備更和準確的發射控制系統。這些設備是理想的斬波和階段發射控制系統。

CR4800系列

CR4800系列，平均有效值電壓傳感器和變送器旨在提供成正比的直流輸出和交流電壓輸入，這些器件*適合于一般的應用，如固定頻率的電壓電源。

CR5200系列

CR5200系列，直流電流轉換器設計旨在提供一個直流信號，該信號與交流感應電流是成正比的。這些設備是專為直流，以及針對他們的一般及日常應用。利用先進的磁調制技術的范圍2至10安培，利用霍爾效應技術。范圍為20安培以上，

CR5400 

CR5400系列系列，AC / DC霍爾效應電流傳感器，旨在提供一個雙極輸出比例反映輸入電流的波形（跟蹤）。這些設備是專門針對需要多模電流檢測是在應用程序中必須要使用的。

A variety of inputs and ouputs are available to satisfy any application

35mm DIN Rail or Panel Mount

Available with 0 - 5 Vdc or 4 - 20 mA DC outputs

Highest precision available

Connection diagram printed on case

CR4100 Series

The CR4100 Series true RMS Current Transducers and Transmitters are designed for applications where AC current waveforms are not purely sinusoidal. More precise and accurate than other transducers, these devices are ideal in chopped wave and phase fired control systems.

CR4200 Series

The CR4200 Series, Current Transmitters produce a calibrated 4-20 mA DC signal that is proportional to the average RMS input AC current. Designed for multi-point current sensing, these devices provide excellent features in a high value package. The output signal is generated from a user supplied 24 Vdc power supply within the output current loop.

CR4400 Series

The CR4400 Series, Average RMS Voltage Transducers and Transmitters are designed to provide a DC output proportional to the AC current input. These devices are best suited for general applications, such as fixed frequency voltage supplies.

CR4500 Series

The CR4500 Series, true RMS Voltage Transducers and Transmitters are designed for applications where AC voltage waveforms are not purely sinusoidal. More precise and accurate than other devices, these units are ideal in chopped wave and phase fired control systems.

CR4800 Series

The CR4800 Series, Average RMS Voltage Transducers and Transmitters are designed to provide a DC output proportional to the AC voltage input. These devices are best suited for general applications, such as fixed frequency voltage supplies.

CR5200 Series

The CR5200 Series, DC Current Transducers are designed to provide a DC signal which is proportional to a DC sensed current. These devices are designed for direct current only, targeting them towards general and daily applications. The ranges 2 to 10 Amp utilize an advanced Magnetic Modulator technology and the ranges 20 amps and above utilize Hall Effect technology.

CR5400 Series

The CR5400 Series, AC/DC Hall Effect Current Transducers, are designed to provide a bipolar output that proportionally reflects (traces) the waveform of the input current. These devices are specifically targeted to be used in applications where multi-mode current sensing is required. 

CR5210-2

CR5210-2 電流傳感器 實芯

CR52102

電流傳感器

CR5210-2

CR5210-2 電流傳感器 實芯

CR52102